首页    产品仓库  品牌专卖  产品导航  综合目录   专业产品  用户注册  

关于我们 意见反馈 客服中心
联系我们 购 物 车 用户帮助
郑重说明 收 藏 夹 广告服务
合作伙伴 订单查询 集团购物
产品查询:        本站展示产品众多,使用产品检索查询可以迅速找到您所需要的产品!

您现在的位置:首页-->分离制备浓缩-->离心机 -->SG-851-type desktop large-capacity centrifuge
产品编号:p0016128
品    牌: 
购买热线:021-65682142、65683854、65688364    服务热线:shuoguangdianzi@126.com
点击查看图片实际尺寸大小
订货信息
货号 名称 规格 备注 市场价 现在销售价 是否现货 购买
c0040049 SG-851-type desktop large-capacity centrifuge Speed Range:500-6000 r / min capacity:50ml×6 4560.00 3800.00 现货
产品详细资料

Product Introduction:
SG-851-type desktop large-capacity electric centrifuge is the company to meet the needs of various laboratories, carefully designed and sophisticated process technology, large capacity for various types of laboratory experiments by centrifugation of precision instruments。
This high-speed centrifuges used centrifuge rotor rotating centrifugal force generated by the powerful, to speed up the settling velocity of particles in the liquid, the samples of different sedimentation coefficient and buoyant density of the material separate, is a non-uniform system of liquid separation equipment.

Features:
1, attractive appearance, small size, fully functional
2, light weight, large capacity
3, simple, easy to use
4, stable, adjustable speed and can automatically adjust the balance
5, low temperature rise of high efficiency, wide adaptability
6, applies to the hospital laboratory, biochemistry laboratory for qualitative analysis, for plasma, serum, urea, and vaccine manufacturing use.
Handling Precautions
Work in a high speed centrifuge, used to safety and to ensure that the equipment to maintain high precision work, we must do the following:
(1).Centrifuges used to be placed in a smooth, strong on the counter; large-capacity high-speed low-speed centrifuge and refrigerated centrifuge to be placed accordingly on the ground in a solid, level place. Centrifuge work done, the load balancing, weight error as small as possible, otherwise it will cause severe vibration, and shaft damage turned centrifuge.
(2).Centrifuge starts, switch knob should be on the low speed position, start and then gradually adjust to the desired value. A work, shall knob again transferred to low-bit work, at high speed block ban on direct start.
(3).Rotor in the strict inspection before each use if a foreign body and the dirt hole, in order to maintain balance. Turned around and must be kept dry and clean, do not impact abrasion. Such as accidentally dropped, turned to X-ray film should check that no internal injury can continue to use. Turned after each use with warm water (50 ℃ ~ 60 ℃) and neutral detergent immersion cleaning, and finally with distilled or deionized water rinse, soft cloth after drying with hair dryer, wax, dry place.
(4).Pull all kinds of tube length, strength and stretch are different, should the need to use, the tube can be made of many different materials, such as polyethylene, cellulose, polycarbonates, polypropylene. Use care to ensure the sample, non-corrosive materials, solvent and gradient centrifuge tube and cap components. Expired, the aging, there are cracks or corrosion of the tube by minimizing or spin-down use. Control the use of plastic tube number, pay attention to standard matching. Centrifugal process may open the centrifuge lid, not by hand or foreign body collisions are turned and the rotation of the centrifuge tube.
(5) To ensure safety, be sure to use ground wire
(6).In the centrifuge process, such as abnormal phenomena, such as the noise and vibration is not normal, should immediately stop checks, not to find reasons not to continue to operate .
(7).Daily use of centrifuges in the process, every three months the level of response to host a degree of correction for each transfer using 500 million deal with a vacuum pump oil, working 500h should check drive motor carbon brush, preferably with a vacuum cleaner to friction toner remove, if necessary, to replace carbon brushes or commutator with fine sandpaper polish.Should be cleaned about every driver using the 1500h site with high-speed bearings and grease shaft and turned rust-proof joint of fat should be kept painted, do not be long-term anti-rust oil coating oil paper wrap. When not in use should be switched each month low 1 or 2 times, each time 0.5h, to ensure the normal operation of the site.
(8). Be sure to place the centrifuge tube placed symmetrically, and to keep the weight fairly. Things in the open centrifuge to centrifuge lid.
(9). Centrifugal liquid should not be too low boiling point,Should pay attention to internal and external pressure ratio.If it is toxic reagents, but also good ventilation treatment.

 

 
技术参数

1, time range 0-60
2, rated power: 200W
3, speed range :500-6000 r / min
4, centrifugal Capacity: 50ml * 6
5, the centrifugal force: 7250g
6, Dimensions (mm): length * width * height 380 * 280 *270

 
购买热线:021-65682142、65683854、65688364    服务热线:shuoguangdianzi@126.com 产品编号:p0016128
相关链接
 
NF1200系列离心机NF800系列离心机NF系列离心机CN系列离心机NF048血液离心机LABOFUGE 300病毒
BIOFUGE全能台式LE6EDT/RT新型多CYROFUGE 6000I大RC 12BP 超大容量RC-4 大容量通用SG-851型台式大容
SG-850型 高速台SG-800型系列低速普通小型台式离心TGL系列台式高速TGL系列高速台式TGL-16高速台式冷
TGL-16M高速台式TG16系列台式高速TG16-W微量高速台GL-21M高速冷冻离GL-20G-II高速冷GL-20B立式高速冷
GL-16G-II高速冷GL-12B立式高速冷DL系列低速(冷冻DDL/LXJ/TDL低速KA-1000型台式低801/2型 台式电动
800B型台式低速离TDL系列低速台式TDL-80-2B型台式TDZ5系列多管架自TDZ4系列低速自动TD5A系列低速台式
DL系列大容量冷冻DL-5M低速冷冻离LX-100 手掌式离L802型 离心沉淀Mikro 200/200R小Mikro 120小型高
RC-4通用大容量冷贺利氏Cyrofuge 贺利氏Labofuge HN075血液离心机CN090/180台式离NF800-800R多功
DGW99型台式高速LXG--1电动离心机LXG--2电动离心机VS-21SMT高速大容VS-18000M高速冷VS台式微量高速离
2-16A高速台式离2-16B高速台式离3-18R台式高速冷Mini Star微型迷Super MiniStar超1-4A低速台式离心
1-4B低速台式离心2-14A高速台式离GMC-060迷你离心VS-100N型掌中型LX-200 迷你离心Spctrafuge?型微
Spctrafuge?袖珍RZ-40台式乳脂离RZ-50台式乳脂离XJ4/XJ8微机控制ModelWM-11无油气XT-5702ULT系列超
离子风鼓SG-852型 大容量SG-853型 自动容SG-850 High SpeSG-851-type desSG-852-type lar
SG-853 automatiTSE-2500微孔板离LNG-T120(一体机LNG-T98B离心浓缩LNG-L96离心浓缩LNG-T83真空离心
您现在的位置:首页-->分离制备浓缩-->离心机 -->SG-851-type desktop large-capacity centrifuge

 © CopyRight 2001-2015, Inc. All Rights Reserved 中国生命科学仪器网版权所有   返回首页  友情链接
沪ICP备08012043号