交流耐压测试
电压：                0 ~ 2.5kV, 0 ~ 5kV 共 2 档
                      AC Line waveform
电压调节率：          20%
最大电流：            100mA
----------------------------------------------------------------------
Reference Value
设定：                0.5, 1, 2, 4, 8, 10, 100mA 共 7 档,
                      combination of from 0.5 ~ 25.5mA ranges
Low Reference：       由 0 ~ 1/2 的 reference value 连续可调
----------------------------------------------------------------------
表头：                2.5kV, 5kV 共 2 档, +3% 满刻度
----------------------------------------------------------------------
电流监看表头：        +5% 满刻度
----------------------------------------------------------------------
绝缘阻抗
直流电压：            500V/1000V
阻抗范围 ：           1 ~ 2000MW
阻抗准确度：          5% ~ 10% 视档位而定
----------------------------------------------------------------------
Judgement
Description           Window comparator system
准确度：              +10% ~ +20% 视档位而定
----------------------------------------------------------------------
计时器：              0.5秒 ~ 10分钟
----------------------------------------------------------------------
基本功能
测试方式：            自动 W-I、自动 I-W、手动 W、手动 I
遥控控制：            可做测试、清除与计时器开启/关闭控制
输出信号：            Test ON, GOOD, NG, and Read signal
                      (The rating of the contact signal are  110VAC 1A or 30VDC 1A)
AC Outlet：           Use only Buzzer and warning light, the output voltage
                      depend on the line voltage and the current is 1A
测试模式：            Double action, good hold, momentary, NG alarm
----------------------------------------------------------------------
使用电源：            交流 120V+10%, 50/60Hz (交流 220V/240V order made)
----------------------------------------------------------------------
附件：                测试线 GHT-105×1, 操作手册×1, 电源线×1 (GHT-106R 选购配备)
----------------------------------------------------------------------
尺寸及重量：          430(宽)×223(高)×510(长) mm, 约 28 公斤

·提供交流耐压及绝缘阻抗测试
·测试容量 500VA
·零点启动开关
·自动警报与灯号显示测试不良
·可作无接触判定
·数位遮断电流设定
·测试中与结果讯号输出
·可选择 W-I 或 I-W 自动测试顺序
·遥控控制盒 (GHT-106R 选购配备)